{"id":169,"date":"2012-07-02T10:56:11","date_gmt":"2012-07-02T18:56:11","guid":{"rendered":"http:\/\/www.destinationssm.com\/?p=169"},"modified":"2012-07-02T20:18:03","modified_gmt":"2012-07-03T04:18:03","slug":"packwood-national-tour","status":"publish","type":"post","link":"https:\/\/www.directedconsulting.com\/destinationssm\/?p=169","title":{"rendered":"Packwood National Tour"},"content":{"rendered":"

\"\"<\/a><\/p>\n

The whole month of June has been filled with rainy weekends that we didn’t even bother bringing the car out to autocross in. \u00a0One of the downsides to running a high power car is that, in the wet, you just get hosed on PAX. \u00a0So, as little fun as I have autocrossing in the rain in general, it’s also uncompetitive, so the idea of towing for 3 hours each way to get creamed in the rain is unappealing. \u00a0Seattle might not have been the greatest place to build this car…<\/p>\n

Fortunately, it gave me some time to mess around a bit with the car. \u00a0I bought a 12+1 tooth crank trigger wheel from Trackspeed Engineering, and after ~20 hours of trying to make it run reliably, I gave up and switched back to the stock wheel. \u00a0I don’t know if there’s noise on the crank hall sensor from something or if the AEM just doesn’t like getting that many tooth updates, but it’s off the car until I have time to spend more time debugging. \u00a0I replaced both the cam and crank angle sensors with brand new ones from Mazda (they had absolutely no effect on the 12+1 wheel, incidentally,) and replaced the main relay (the relay that broke in Lincoln) while I was in there, which, interestingly, had been superceded by a much different part. \u00a0We also learned that we’re not allowed to run shoulder harnesses in a non-rollbar-convertible, so we pulled the 4\/5 point belts and put in simple lap belts, which removed a bunch of weight from the car and made it a lot easier to get in and out as well.<\/p>\n

\"\"<\/a>After having no problem with power application in Lincoln (and even limited problems with power in Packwood,) I upsized the crank pulley (that the SC feeds off) from 120mm to 125mm, and spent a bunch more time on the dyno. \u00a0We’re up to 330rwhp and 258rwtq and spent a lot more time on the low RPM portion of the map. \u00a0The car is now faster and has much smoother power ramp-up, so it’s more drivable too, and is better at putting its power down than it used to be. \u00a0I think this will be the end of my attempted power mods before 2012 Solo Nationals. \u00a0It’s time to work on the suspension setup and on my driving.<\/p>\n

The 2012 Packwood National Tour arrived in a real hurry. \u00a0I spent 2 weeks messing with the trigger wheel to no avail, and had to rapidly switch back to the stock wheel on the Monday night before the NT. \u00a0Wednesday the car went in to get a new muffler, since we were consistently blowing 102dB at Lincoln (over the limit.) \u00a0Thursday I spent 3 hours on the Dyno at Pina Motorsports, and then 6am Friday morning we pulled out from Redmond to head down to Packwood.<\/p>\n

The practice course was the dirtiest (gravel\/etc.) course I’ve ever driven on, but we did some rough shock tuning and the car was working really well. \u00a0Ironically, both of our paddock-mates’ cars broke, so we spent some time helping fix them. \u00a0The rest of the weekend, the car performed perfectly (despite us driving it inadequately,) and I managed to put a 1.776 second victory on the class, running fairly consistent times. \u00a0At the end of the weekend, we rolled the car onto the trailer and drove home, ready for the Pro in a few short days.<\/p>\n

We learned that the car’s fuel starving at around a third of a tank, which will require some investigation after the ProSolo. \u00a0I am also sure at this point that the car will be faster with more confidence-inspiring brakes, so that will be another focus for after the ProSolo. \u00a0The traction control also needs some further tweaking, and the wing really needs some string+video attention and a Gurney Flap. \u00a0Time, time time…<\/p>\n

Here’s some videos of my fastest runs for the weekend (expand for 720p.) \u00a0As you can tell, I’m still driving the car incredibly abruptly. \u00a0It’s still more than a bit of a shock, coming out of stock class. \u00a0At this point, I have at least as much speed to be gained in learning to drive than will be found with further car setup…<\/p>\n